Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for CAN bus. It's subtle, doesn't have keys or LEDs and is concealed in the wiring of the vehicle.
The user can also disable the system temporarily using Transport Mode when renting out their car. This guide will walk you through the installation process of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning, and relay attacks. The system is directly connected to the ECU of your car and secured by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other modern methods. It isn't able to be disabled using circuit cuts.
The system is simple to use, but professional installation is advised to ensure a perfect connection to the ECU of your vehicle. Installers certified by Thatcham can assist you with the installation and programing of your Ghost system. They can also suggest an alarm or tracking system to complete the protection package for your vehicle.
To prevent an accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. When the battery is disconnected, the installer can be able to work safely. Basic hand tools are useful for making precise connections and a multimeter may be used to verify the electrical properties and safety. Insulation tape and cable ties are also necessary for securing connections and keeping wiring tidy. The user's manual offers specific instructions tailored to the Ghost Immobiliser model you have.
It is important to choose a grounding location that is free of paint or debris during installation. The installer should ensure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. Depending on the model, these wires may require soldering or plugged into. Using a top-quality connector is recommended to ensure a sturdy and secure connection.
Transport Mode can be turned on by the customer once the installation is complete. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. The user must press the icon for service on the dashboard five times over 2 seconds. After that the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for those who rent out their vehicles often on platforms like Turo. An immobiliser can reduce insurance costs, since it decreases the likelihood of theft.
Getting Started
If you are looking for a solution to protect your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It protects your vehicle from starting even the theft or copies the key. This is due to its sophisticated technology that is designed to stop the engine from running unless the correct PIN code is entered.
The device connects to the vehicle's bus system CAN and allows direct communication with the ECU. It makes use of buttons already on the dashboard and wheel to create a unique sequence only you can identify which makes it impossible for others to start your car. This is the ultimate security system that will safeguard your car's pride and joy, keeping its value intact should you decide to sell it in the future.
Installing a Ghost immobiliser is easy however, you must follow the instructions to avoid electrical problems and malfunctions of the system. First, you need to locate and identify a constant 12V power source and a good grounding point on the vehicle's chassis. Then, you can begin connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a solid connection. Also, ensure that you cover the connections with heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.
After the wires have been connected, you can reconnect the battery and turn on the engine to test the immobiliser's function. If everything is functioning properly then you can put it in a secure place under the dash or elsewhere in the vehicle. Make sure you hide it in a secure manner to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a high-quality deterrent to car thieves. It is impervious to hacking and key cloning and cannot be disabled without the code. It is also simple to use and is able to be put into the service valet mode to ensure that your automobile is not activated when you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser does not interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals but instead uses CAN data for communication with your ECU. It doesn't even require any modifications to your existing key fobs.
To make use of the Ghost Immobiliser simply switch on the ignition of your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. Now you can start your vehicle and drive safely.
Once installed Once installed, the Ghost Immobiliser will secure your vehicle from hacking and key cloning and will also protect the value of your pride and joy. If ghost immobiliser review have to surrender your vehicle for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll need a constant power source (12V) in addition to a grounding source to complete the installation of the Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. Cable ties are also suggested to secure the wires. This will reduce the risk of theft by thieves. Make sure you verify the location of these points to avoid committing a mistake and mark them with an adhesive or label. Check all connections for signs they're wearing out. Make sure that all connections are securely in place, and properly protected. Don't forget to test the Ghost Immobiliser after the installation is complete. This will ensure that the unit functions correctly, and that all connections are safe and well-insulated. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your car's ECU to stop unauthorized motor starting. The innovative technology protects your vehicle against hacking and key cloning and other methods used by thieves to steal cars. The Ghost is also able to work in conjunction with other alarm and tracking systems to give the best protection for your vehicle. The Ghost's unmatched features, coupled with its secluded design, make it a popular option for both drivers who love cars and security-conscious drivers.
It is essential to follow the steps of installation to ensure a proper integration of Ghost Immobiliser. The best place to start is to consult the wiring diagram of your vehicle that serves as a guideline to locate and connecting the wires required. You'll then need to identify the power and grounding sources. Once you've located them, you will have to mark them to make them easy to identify during installation. It is also essential to use high-quality tools and materials. Hand tools are a must in making connections that are precise and a multimeter can check electrical values and ensure safety. Cable tie and insulation tape will keep all connections neat. Additionally, a user's manual will provide specific instructions tailored to your Ghost model.
Before you begin installing it is important to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser works according to plan, and prevents unauthorised vehicle start-ups. It is recommended to complete this routinely as part of your regular inspections of your vehicle to ensure that the system is working correctly.
After the installation is completed Once the installation is complete, you can drive your vehicle with confidence. The Ghost will help keep your car and its contents safe from potential thieves and ensure that nobody is able to drive off with your vehicle without the proper PIN code. The Ghost can be paired with an approved Thatcham tracker that detects any attempts to steal or tamper with. This allows you to track your car in the event that it's stolen.
The Ghost is compatible with a variety of vehicles, including those made by most major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that assures us that we follow strict guidelines for the installation of our products. This reassures customers, insurers, and law enforcement that installations are done safely and in a correct manner.